Easily link a serial Modbus device to a TCP Modbus device in harsh environments.
Quick Facts
- Provides a gateway between Modbus TCP & Modbus ASCII or RTU devices.
- Allows older PLCs & similar devices to talk to newer TCP sensors & meters.
- Enables you to monitor a serial industrial device from your office.
- Rugged design for operation in a wide temperature range.
Further Details
- UL Listed for use in Class 1 Division 2 hazardous areas.
- NEMA TS-2 rated for use in transportation applications.
- Routes Modbus traffic based on Modbus ID, & remaps conflicting Modbus IDs.
- Offers Modbus messaging priority control, selectable by source or function code.
- Features a built-in Web server & easy-to-use management software.
- Can be easily integrated into most Modbus network configurations.
- Converts ASCII to RTU as well as ASCII or RTU to Modbus TCP.
- Features a DB9 port & terminal block for serial connections.
- Equipped with a 10-/100-Mbps port for TCP connectivity.
- Boasts high throughput with low latency.
- Slim IP30 enclosure saves you on DIN rail space.
- Includes a DIN mounting clip & spring.
Easily integrate an older serial Modbus device into your Ethernet Modbus network. This rugged serial server gives you a simple way to migrate to an Ethernet-based industrial control system-without having to replace the older Modbus equipment you've already invested in.
Translating older & newer protocols, the 1-Port Modbus Hardened Serial Server converts mismatched serial baud rates & settings, enabling the serial Modbus device to become a node on your Ethernet network. Older PLCs can then talk to newer sensors, meters, scales, & other industrial monitoring & automation instruments.
Configuration can be done through a direct serial connection or via the network, so you can improve productivity & cut down on the amount of time required to troubleshoot a serial device on a factory floor or in a remote location. Configure devices, upgrade firmware, & more-all this from the comfort of your office.
A simple-to-install, user-friendly software application enables programming. No time-consuming setup is required. The software also features Modbus messaging priority control & allows management through multiple TCP/IP client sessions. The serial server can be configured for TCP client or server operation.
A built-in traffic monitor provides instant verification of a successful installation, & you can view the serial server's operational status in real time.
The 1-Port Modbus Hardened Serial Server has a standard DB9 serial port for RS-232 device connections & a removable terminal block for an RS-422 or RS-485 device connection. It also has an autodetecting 10BASE-T/100BASE-TX port for the Ethernet network connection.
Either device on either side can be a Modbus master or slave, customizable to your application. A serial master can be configured to control an IP slave, for instance. Also, a serial slave device can be accessed over a LAN or WAN by up to 16 simultaneous Modbus TCP masters.